Fiberglass Facility Pipe

 

Low Pressure, Low Heat
Facility Pipe

Red Thread HP 16 Bar

Low Pressure, Low Heat
Facility Pipe

Red Thread HP 25 Bar

Low Pressure, High Heat
Facility Pipe

Green Thread HP 16 Bar

Red Thread™ HP 16 Bar Facility Pipe

Product Overview

5

Red Thread HP 16 pipe is manufactured by the filament winding process using aromatic amine-cured epoxy thermosetting resin to impregnate strands of continuous glass filaments.

5

The pipe is rated to 232 psig in accordance with API 15LR.

5

20 year design life at 200°F (93°C), serviceable up to 21 O°F (99°C) by applying a derating factor of 0.92 to all component ratings.

5

ASTM D-2996 Classification: RTRP-11AW-3110 for static design basis.

Product Fittings

5

Fittings details are in two documents; use Cl1350 for sizes 2″-16” and Cl1351 for 18”-36″.

5

All fittings may not have the same pressure rating as the pipe. System rating is governed by the lowest rated component used.

5

Depending on the configurations and size, the fittings construction method will be compression folded, contact molded, fabricated or filament wound.

5

Fittings are manufactured with the same chemical and temperature capabilities as the pipe.

Product Applications

5

Brine Solutions

 

5

Crude Oil & Gas

 

5

pH 2-13 Solutions

 

5

Saltwater Handling

 

5

Carbon Dioxide (C0₂)

 

5

Cooling Water

 

5

Effluent Drains

 

5

Elevated Temperature Oilfield Applications

 

Additional Resources

Installation and Application Practices

Product Specification Manual

Piping System

Epoxy Fittings Dimensions

Large Diameter Fittings

Red Thread™ HP 25 Bar Facility Pipe

Product Overview

5

All Red Thread HP 26 Bar pipe is filament wound with continuous strands of glass filaments saturated with amine-cured epoxy thermosetting resin. The pipe wall includes an internal resin-rich corrosion barrier.

5

The pipe is designed in accordance with API 15LR at 200°F (93°C), serviceable up to 21O°F (99°C) by applying a derating factor of 0.92 to all component ratings.

5

The static pressure rating is 362 psig (25 Bar) for a hydrostatic design life of 20 years per ASTM D2992 Procedure B. For 2”-6” (50-150 mm) sizes, the matched tapered joining method is used and the pipe is available in random 30 foot (9.14 meter) lengths. For 8”-24” (200-600 mm) sizes, the matched tapered joining method is used and the pipe is available in random 40 foot (12 meter) lengths.

5

Pipe is supplied with one end belled (integral bell or factory-bonded coupling) and one end tapered.

5

ASTM D-2996 Classification: RTRP-11AW1-3110 for static design basis.

Product Fittings

5

Fittings are manufactured with the same chemical or temperature capabilities as the pipe. Depending on the particular part and size, fittings will be contact molded or filament wound.

Product Applications

5

Brine Solutions

 

5

Crude Oil & Gas

 

5

pH 2-13 Solutions

 

5

Saltwater Handling

 

5

Carbon Dioxide (C0₂)

 

5

Cooling Water

 

5

Effluent Drains

 

5

Elevated Temperature Oilfield Applications

 

Additional Resources

Installation and Application Practices

Product Specification Manual

Epoxy Fittings Dimensions

Green Thread™ HP 16 Bar Facility Pipe

Product Overview

5

Pipe is manufactured by filament winding process using amine-cured epoxy thermosetting resin to impregnate strands of continuous glass filaments. The pipe wall includes an internal resin-rich corrosion barrier.

5

Green Thread HP 16 products are available in sizes 1”-42″ (ZS-1,050 mm) diameters with a static pressure rating of 232 psig (16 bar). The pipe is designed for continuous operation at 200°F (93°C) serviceable up to 230°F (110°C) by applying a derating factor of 0.76 to all component ratings. Sizes 1″-6″ (25-150 mm) are available in 20’ (6 m) lengths and sizes 8”-42″ (150-1,050 mm) are available in 19’ or 39’ (6 or 12m) lengths.

5

ASTM D-2996 Classification: RTRP-11FX1-3110 for static design basis.

Product Fittings

5

Fittings are manufactured with the same chemical and temperature capabilities as the pipe. Depending on the configurations and size, the fitting construction method will be compression molded, contact molded, fabricated or filament wound. Fitting details are in two documents use Cl1350 for sizes 1″-16″ and Cl1351 for 18″-42″. All fittings may not have the same pressure rating as the pipe. System rating is governed by the lowest rated component used.

Product Applications

5

Elevated Temperature Oilfield Applications

 

Additional Resources

Installation and Application Practices

Product Specification Manual

Piping System

Epoxy Fittings Nominal Dimensions

Additional Fiberglass Facility Piping Information

 

Engineering and Piping Design Guide

Chemical Resistance Guide